Directions
All applications
Initial application: (1oz equals 30mL) 2oz/60ml per quart of engine oil and other lubricants.
Subsequent Applications
- Always add a minimum of 30ml per litre to top off oil. 1oz per quart.
- With older or high performance engines, use 60ml per litre at each oil change. 2oz per quart
- EVERREV will last 10,000 to 40,000 km with normal wear.
With older engines, change oil and filter within 500 miles of treating engine oil, thereafter 2oz per quart at usual service interval.
Automotive
Add 40ml (4%) per litre of transmission fluid. Pour through dip stick tube.Differential - Remove 90ml of lubricant and add 90ml EVERREV.All other vehicle application points - add 60ml (6%) per litre of lubricant at each change.
Motorcycle
Add 2oz/30ml per quart to engine or transmission. EverRev is safe for all wet clutch transmissions.
*IMPORTANT*
Do not overfill lubrication reservoirs and also ensure they are not under filled; precautions need to be taken to remove excess fluid when adding EVERREV.
Applications
Automotive/ Motorcycle
- 2 and 4 stroke motorcycles
- Engines (Gas, Diesel)
- Transmissions
- Differential 2 and 4 wheel Drive
- Wheel Bearings
- Power Steering Units
- Air Conditioners
- Hydraulic Systems
- All Grease Applications
Recreational
- Motorcycle (two and four stroke)
- Boat Motors (two and four stroke)
- Boat Drive Systems
- Race Cars
- High performance engines
- Home Workshop
- Jet Skis /Go Carts
- Snow Mobiles
- Model Airplanes
- Firearms
Industrial
- Generators
- Compressors
- Forklifts
- Earth moving
- Shipping
- Military
- Refrigeration
- Hydraulic Systems